An-Shine Technology
pSlitting machine
Ø1600mm AS Light Gauge Slitter
p剪切机
Ø1600mm AS 薄纵剪切机
分切材料:AA1000,AA3000,AA5000,AA8000系列铝及合金
Material of coils: AA1000, AA3000, AA5000, AA8000 series aluminum and aluminum alloy
卷材厚度: 卷材尺寸: 卷芯内径: 切边宽度: 成品卷经: 剪切方式: 辊面宽度: |
0.04-0.4mm 1550mm(宽度可定制), 600(宽度可定制) OD2000mm(最大), ID300 mm (最小) 10T(最大)不带套筒 钢套筒 Φ150mm、Φ200mm、Φ300mm、Φ400mm 950mm(最大), 5mm(最小) 70条(最多) , 最少2条 (最小) 5-25mm每边 1600-2000mm 最大1000m/min 真空吸引+绕卷 圆盘刀 1600mm 16m×10m |
Entry Thickness: Entry Width: Entry Coil: Coil weight: Spools: Core ID: Exit width: Number of slitting: Finished products OD: Width of edge trimming: The max slitting speed: Scrap edge disposal: Ways of slitting: Width of the roll surface: Area: |
0.04-0.4mm 1550mm (optional), 600mm (optional) OD 2000mm(Max), ID300 mm (Min) 10T (Max), without steel spool steel spools Φ150mm、Φ200mm、Φ300mm、Φ400mm 950mm(Max), 5mm(Min) 70 pieces(Max), 2 pieces(Min) 1600-2000mm 5-25m each side 1000m/min Vacuum pull+ rewinding Circular block knife 1600mm 16m×10m |
性能保证: |
≤ 0.5mm(底层5圈, 料头除外) ≤ 0.0025X 成品外径 mm(底层5圈, 料头除外) ≤ 2~5%X(名义厚度) ≤ 0.22mm/m 目标宽度±0.03mm |
Finished product:
Staggering tolerance of the finished products (BVF):≤ 0.5mm (5 rings on the bottom except the material head)
Tower tolerance of the finished products (PA):≤ 0.0025 × Finished products OD mm (5 rings on the bottom except the material head)
Burr: ≤ 2~5%X (nominal thickness)
Lateral Bending: ≤0.22mm/m
Slitting Width Tolerance: Setting Width ±0.03mm